Friday, June 4, 2010

Turbo Systems Installation Instructions Acura Integra / Honda Civic

Honda / Acura service / repair manual. A large table / bench nearby. Standard selection of automotive tools. Plenty of adjacent available workspace …

Disclaimer: The product described herein are for off-road use only and are not intended for installation on emissions
controlled vehicles.
2255 Agate Court Simi Valley, CA 93065 Tel. 805.581.0333 Fax: 805.584.1913
www.turboneticsinc.com
Turbo Systems
Installation Instructions
Part No. 60108-rev.b
Acura Integra /
Honda Civic2255 Agate Court Simi Valley, CA 93065 Tel. 805.581.0333 Fax: 805.584.1913
www.turboneticsinc.com
2
Turbo Kit Installation Instructions No. 60108-rev.b
IMPORTANT, READ THIS FIRST: Study these instructions completely before proceeding.
Engine and/or turbocharger damage may occur if any component within these instructions
is improperly installed. Turbonetics, Inc. or any of its distributors cannot be held responsible for
damages as a result of negligent or improper installation. This complete turbocharger system can
be installed using common tools and automotive procedures, but installer must have a thorough
knowledge of automotive engine operation and feel comfortable working on the vehicle. If in
doubt, consult a knowledgeable turbo installer or Turbonetics tech support specialist with any
questions.
Although this turbo system has been designed to use existing emissions controls (including
catalytic converter), check local laws regarding aftermarket modification to emission controlled
vehicles. Remove the turbocharger kit from its carton and inspect for any obvious physical
damage. All kit components are thoroughly inspected and carefully packaged prior to shipment
from the factory. If any shipping damage is evident, contact your supplier and request that they
process a claim with the shipper involved. Be sure to review the Turbo System Parts.

Website: turboneticsownersclub.com

0 comments:

Post a Comment

  ©Template by Dicas Blogger.