Monday, September 13, 2010

NISSAN VEHICLE WHEEL ALIGNMENT

SERVICE INFORMATION When adjusting the wheel alignment on Nissan vehicles, please note the following: Preliminary Steps: 1. You should make sure that Tire Pressures are properly set before performing alignment checks. 2. Inspect the vehicle to make sure there are no signs of visible damage to any suspension components. General Information and Recommendations: 1. A Four-Wheel Thrust Alignment should be performed. • This type of alignment is recommended for any Nissan vehicle. • The four-wheel thrust process ensures that the vehicle is properly aligned, and helps ensure proper ‘centering’ of the steering wheel. 2. Use the right alignment machine. • You must use a quality alignment machine that will give accurate results when performing alignment checks. • This would include machines such as the Hunter Series 611 or equivalent. Please refer to the Nissan TECH-MATE Service Equipment Catalog. • The alignment rack itself should be capable of accepting any Nissan vehicle. • The rack should be checked to ensure that it is level. Nissan Bulletins are intended for use by qualified technicians, not ‘do-it-yourselfers’. Qualified technicians are properly trained individuals who have the equipment, tools, safety instruction, and know-how to do a job properly and safely. NOTE: If you believe that a described condition may apply to a particular vehicle, DO NOT assume that it does. See your Nissan dealer to determine if this applies to your vehicle. 2/3 3. Make sure the machine is properly calibrated. • Your alignment equipment should be regularly calibrated in order to give correct information. • For example, HUNTER recommends that: Standard style alignment machines (’internal reference’ sensors) should be checked (and calibrated, if necessary) every six months. “External reference” alignment machines (image based) should be checked once a year. If any instrument that’s part of the alignment machine is dropped, or damaged in some way, calibration should be checked immediately. • Check with the manufacturer of your specific equipment for their recommended Service/Calibration Schedule. NOTE: In order to properly document any warranty claim repair, the following two items MUST be attached to the Repair Order (RO): • A copy of the alignment machine printout showing the BEFORE and AFTER alignment readings. • A copy of the alignment machine calibration certification. IMPORTANT: If you don’t attach these two items to the RO, the Claim may be denied (turned down). The Alignment Process: • I MPORTANT : Use only the alignment specifications listed in the appropriate Electronic Service Manual (ESM) when adjusting the alignment on any Nissan vehicle. • When displaying the alignment settings, many alignment machines use a green/red or plus/minus or Go/No Go “indicator”…

Wheel Aginment Machine Ppt, Nissan S14 Wheel Alignment Guide, Ppt On Alignment Control Of Vehicle, Ppt Of Alignment Control Of Vehicle, Thrust Alignment Nissan Note, Tyre Fitting Wheel Alignment Ppt, Nissan Silvia Esm Free Download, , Wheel Alignment Rack, Wheel Alignment Nissan

0 comments:

Post a Comment

  ©Template by Dicas Blogger.